Metal Lift Kits for Motormax 1969 1/24 FORD F-100 scale diecast model
truckUSD $27.00
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
This Lift kit is specifically made for MotorMax 1/24 scale 1969 Ford F-100
Please note, the lift kit takes 15-20 mins to install. Difficulty level: 3/10 - 4x Adjustable Waterproof Lift kits - Fully metal
- INCLUDES WHEELS/TIRES/AXLES - includes springs - Comes with a mini screw driver to tighten the nuts and bolt Materials needed to install:
Mini screw driver and mini wrench (included)
Drill (for drilling into the car frame) (see last pic for details) (drill/bit not included) Manual Instructions:
1. Take your drill bit that’s the same size as the metal lift kits hole.
2. Drill below your wheel well into an accurate spot to place lift. (See pictures)
3. After 1st hole has been drilled, **make sure all other holes are even on both Front sides. Otherwise your truck will look lopsided when finished** Make sure the rear Lift is drilled in the center or the rear frame.
4. Mark your holes before you cut any other sides.
5. After you’ve finished drilling the holes on all the sides, take your lift kit and (just as according to the closeup picture)
Take the screw on the side of the lift kit and place it into your drilled hole and then tighten each accordingly.
Lastly, pop in the springs after you have finished screwing the lift kit onto frame, then place your wheels on the wheel placement along with your axles. (See pics)
Lift can fit up to 1” 1/2 wheel size (diameter)
Lift raises the truck about 1" from the wheel well.
Please note, the lift kit takes 15-20 mins to install. Difficulty level: 3/10 - 4x Adjustable Waterproof Lift kits - Fully metal
- INCLUDES WHEELS/TIRES/AXLES - includes springs - Comes with a mini screw driver to tighten the nuts and bolt Materials needed to install:
Mini screw driver and mini wrench (included)
Drill (for drilling into the car frame) (see last pic for details) (drill/bit not included) Manual Instructions:
1. Take your drill bit that’s the same size as the metal lift kits hole.
2. Drill below your wheel well into an accurate spot to place lift. (See pictures)
3. After 1st hole has been drilled, **make sure all other holes are even on both Front sides. Otherwise your truck will look lopsided when finished** Make sure the rear Lift is drilled in the center or the rear frame.
4. Mark your holes before you cut any other sides.
5. After you’ve finished drilling the holes on all the sides, take your lift kit and (just as according to the closeup picture)
Take the screw on the side of the lift kit and place it into your drilled hole and then tighten each accordingly.
Lastly, pop in the springs after you have finished screwing the lift kit onto frame, then place your wheels on the wheel placement along with your axles. (See pics)
Lift can fit up to 1” 1/2 wheel size (diameter)
Lift raises the truck about 1" from the wheel well.
Price type
IN STOCK
OUT STOCK
.
