Eztec 27 Mhz REMOTE CONTROL-Silverado North Pole Express Scientific

Please double check that you need a 27.145 Mhz remote!  It looks very similar to the 2.4 Ghz remote, but this will not work with a 2.4 Ghz engine.  If your engine says 27.145 Mhz on the bottom of it and it is powered by 4 C batteries that go in the cab of the engine, this remote will work.  If your engine is powered by 6 C batteries that go in the tender this remote will NOT work with your engine. To reiterate, this remote only works with engines that say 27.145 Mhz on the bottom of them AND are powered by 4 C batteries that go in the cab of the engine. Remote works with Eztec/Scientific Toy's G Gauge remote control trains that operate at 27.145 Mhz, like the Silverado Express and the North Pole Express. It does NOT work with all Eztec/Scientific Toy Trains.  Please read: If the remote you are replacing looks different from the one shown in the pictures, or if it requires AAA batteries (not 9V), this one probably will NOT work with your train. If the remote you are replacing does look like the one in the pictures (and requires a 9V battery) this remote will probably work with your train, but please check to make sure you have a problem with your remote and not with the engine.  You can do this by checking to see: If you have a remote and your replace the batteries in your remote and the light on the remote comes on when you push the buttons on the remote, then your remote is probably ok, and you have a problem with your engine, and this remote probably will NOT work with your train. If you replace the batteries in your Engine and turn the Engine on (by turning the bell), and then push the button (behind the bell) to make it start, and the train doesn't move, then you have a problem with your engine, and this remote probably will NOT work with your train If you don't know what the remote you are replacing looks like: Please check to see if there is a sticker on the bottom of your train that says 27.145 Mhz AND that your engine requires 4 C batteries that go in the Engine's Cab. If your engine does not have that sticker, or if it requires 6 C batteries that go in the Coal Tender, this remote will NOT work with your train. Please took a look at the ends of your track pieces.  If the track that came with your set does not look like the track ends shown in the last picture, this remote will NOT work with your train. Please check to make sure your Engine is working by following these steps: Replace the batteries in your Engine and turn the Engine on (by turning the bell), and then Push the button (behind the bell) to make it start If train doesn't move, then you have a problem with your engine, and this remote probably will NOT work with your train. If you are in doubt, please message us with any questions and we will be glad to assist you in determining if this remote will work with your train. Uses a 9 Volt Battery (Not included.)

Returns Accepted for this item if it's within 30 Days