Eztec 2.4 Ghz Band 1 REMOTE CONTROL-North Pole Express Holiday

Please double check that you need a 2.4 Ghz Band 1 remote!  It looks very similar to the 27.145 Mhz remote, but this will NOT work with a 27.145 Mhz engine.  If your engine says 2.4 Ghz Band 1 on the bottom of it this remote WILL work, but it must look like the red sticker as shown in the 2nd picture. To reiterate, this remote only works with engines that say 2.4 Ghz Band 1 on the bottom of them. Remote works with Eztec/Scientific Toy's G Gauge remote control trains that operate at 2.4 Ghz, like the Holiday Express and the North Pole Express. It does NOT work with all Eztec/Scientific Toy Trains.  Please read: If the remote you are replacing looks different from the one shown in the pictures, or if it requires a 9 Volt battery (not 2 AAA), this one will NOT work with your train. If the remote you are replacing does look like the one in the pictures (and requires 2 AAA batteries) and your engine says 2.4Ghz Band 1 , like the second picture, this remote will probably work with your train, but please check to make sure you have a problem with your remote and not with the engine.  You can do this by checking to see: If you have a remote and your replace the batteries in your remote and the light on the remote comes on when you push the buttons on the remote, then your remote is probably ok, and you have a problem with your engine, and this remote probably will NOT work with your train. If you replace the batteries in your Engine and turn the Engine on (by turning the bell), and then push the button (behind the bell) to make it start, and the train doesn't move, then you have a problem with your engine, and this remote probably will NOT work with your train If you don't know what the remote you are replacing looks like: Please check to see if there is a sticker on the bottom of your train that says 2.4 Ghz Band 1 AND that your engine requires 4 C batteries that go in the Engine's Cab. If your engine does not have that sticker, or if it requires 6 C batteries that go in the Coal Tender, this remote will NOT work with your train. Please took a look at the ends of your track pieces.  If the track that came with your set does not look like the track ends shown in the last picture, this remote will NOT work with your train. Please check to make sure your Engine is working by following these steps: Replace the batteries in your Engine and turn the Engine on (by turning the bell), and then Push the button (behind the bell) to make it start If train doesn't move, then you have a problem with your engine, and this remote probably will NOT work with your train. If you are in doubt, please message us with any questions and we will be glad to assist you in determining if this remote will work with your train. Uses 2 AAA Batteries (Not included.)

Returns Accepted for this item if it's within 30 Days